? u.k. 0800-250055 australia 1800-803 219 ? new zealand 0800-441-747 visit us at: www.andrew.com 501 7-16 din male l4.5pdm-rc n male l4.5pnm-rc 7-16 din female l4.5pdf-rc n female l4.5pnf-rc standard vswr specifications assembly vswr, maximum (r.l., db) frequency 1-25 ft 25-100 ft 100-200 ft 200-500 ft above 500 ft band, ghz type number (0.3-8 m) (8-30 m) (30-60 m) (60-150 m) (150 m) 0.806-0.960 ldf4.5-50 1.12 (24.9)* 1.13 (24.3)* 1.13 (24.3)* 1.13 (24.3)* 1.13 (24.3)** and 1.7-2.0 ldf4.5rn-50 1.12 (24.9)* 1.13 (24.3)* 1.13 (24.3)* 1.13 (24.3)* 1.13 (24.3)** * expected typical values based on guaranteed 1.13 vswr for bulk cable and type n or din straight connectors. if guaranteed valu es are required, contact andrew. ** 1.13 vswr guaranteed for bulk standard cable lengths 500 ft and above. connectors type inner contact outer contact plating max. length max. dia. interface description number attachment attachment code in (mm) in (mm) n male ring flare l4.5pnm-rc captivated self flare sg 3.2 (81.5) 1.42 (36) n female ring flare l4.5pnf-rc captivated self flare sg 3.0 (76) 1.32 (33.5) 7-16 din male ring flare l4.5pdm-rc captivated self flare ss 3.1 (78) 1.17 (29.8) 7-16 din female ring flare l4.5pdf-rc captivated self flare ss 3.25 (82) 1.17 (29.8) plating codes : sg - silver plated body and gold plated pin, ss - silver plated body and pin connector accessories ?see page 624. factory attached connectors ?for factory made cable assemblies and jumper cables, see pages 584-587. low vswr specifications, type ldf4.5p-50-( ) assembly vswr, maximum (r.l., db) frequency 1-25 ft 25-100 ft 100-200 ft 200-500 ft above 500 ft band, ghz type number using connector type* (0.3-8 m) (8-30 m) (30-60 m) (60-150 m) (150 m) 0.806-0.960 ldf4.5p-50-40 n 1.08 (28.3) 1.08 (28.3) 1.09 (27.3) 1.10 (26.4) 1.10 (26.4) 7-16 din 1.08 (28.3) 1.08 (28.3) 1.09 (27.3) 1.10 (26.4) 1.10 (26.4) 1.7-2.2 ldf4.5p-50-41 7-16 din 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 0.806-0.960 ldf4.5p-50-42 7-16 din 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) and 1.7-2.2 * connectors ordered separately vswr values apply to straight connectors only, are guaranteed for factory fit assemblies, and are typical for field cut lengths . if two different connector interfaces are selected, the higher vswr value is guaranteed. revised 3/01
|